Artifact Content
Not logged in

Artifact 74224c615d26c412dc2f6cd168d81b4a6480b2d9:


// Copyright 2015 The Rust Project Developers. See the COPYRIGHT
// file at the top-level directory of this distribution and at
// http://rust-lang.org/COPYRIGHT.
//
// Licensed under the Apache License, Version 2.0 <LICENSE-APACHE or
// http://www.apache.org/licenses/LICENSE-2.0> or the MIT license
// <LICENSE-MIT or http://opensource.org/licenses/MIT>, at your
// option. This file may not be copied, modified, or distributed
// except according to those terms.

//! Compilation of native dependencies like LLVM.
//!
//! Native projects like LLVM unfortunately aren't suited just yet for
//! compilation in build scripts that Cargo has. This is because thie
//! compilation takes a *very* long time but also because we don't want to
//! compile LLVM 3 times as part of a normal bootstrap (we want it cached).
//!
//! LLVM and compiler-rt are essentially just wired up to everything else to
//! ensure that they're always in place if needed.

use std::env;
use std::fs::{self, File};
use std::io::{Read, Write};
use std::path::Path;
use std::process::Command;

use build_helper::output;
use cmake;
use gcc;

use Build;
use util;
use build_helper::up_to_date;

/// Compile LLVM for `target`.
pub fn llvm(build: &Build, target: &str) {
    // If we're using a custom LLVM bail out here, but we can only use a
    // custom LLVM for the build triple.
    if let Some(config) = build.config.target_config.get(target) {
        if let Some(ref s) = config.llvm_config {
            return check_llvm_version(build, s);
        }
    }

    let rebuild_trigger = build.src.join("src/rustllvm/llvm-rebuild-trigger");
    let mut rebuild_trigger_contents = String::new();
    t!(t!(File::open(&rebuild_trigger)).read_to_string(&mut rebuild_trigger_contents));

    let out_dir = build.llvm_out(target);
    let done_stamp = out_dir.join("llvm-finished-building");
    if done_stamp.exists() {
        let mut done_contents = String::new();
        t!(t!(File::open(&done_stamp)).read_to_string(&mut done_contents));

        // If LLVM was already built previously and contents of the rebuild-trigger file
        // didn't change from the previous build, then no action is required.
        if done_contents == rebuild_trigger_contents {
            return
        }
    }
    if build.config.llvm_clean_rebuild {
        drop(fs::remove_dir_all(&out_dir));
    }

    println!("Building LLVM for {}", target);
    let _time = util::timeit();
    t!(fs::create_dir_all(&out_dir));

    // http://llvm.org/docs/CMake.html
    let mut cfg = cmake::Config::new(build.src.join("src/llvm"));
    if build.config.ninja {
        cfg.generator("Ninja");
    }

    let profile = match (build.config.llvm_optimize, build.config.llvm_release_debuginfo) {
        (false, _) => "Debug",
        (true, false) => "Release",
        (true, true) => "RelWithDebInfo",
    };

    // NOTE: remember to also update `config.toml.example` when changing the defaults!
    let llvm_targets = match build.config.llvm_targets {
        Some(ref s) => s,
        None => "X86;ARM;AArch64;Mips;PowerPC;SystemZ;JSBackend;MSP430;Sparc;NVPTX",
    };

    let assertions = if build.config.llvm_assertions {"ON"} else {"OFF"};

    cfg.target(target)
       .host(&build.config.build)
       .out_dir(&out_dir)
       .profile(profile)
       .define("LLVM_ENABLE_ASSERTIONS", assertions)
       .define("LLVM_TARGETS_TO_BUILD", llvm_targets)
       .define("LLVM_INCLUDE_EXAMPLES", "OFF")
       .define("LLVM_INCLUDE_TESTS", "OFF")
       .define("LLVM_INCLUDE_DOCS", "OFF")
       .define("LLVM_ENABLE_ZLIB", "OFF")
       .define("WITH_POLLY", "OFF")
       .define("LLVM_ENABLE_TERMINFO", "OFF")
       .define("LLVM_ENABLE_LIBEDIT", "OFF")
       .define("LLVM_PARALLEL_COMPILE_JOBS", build.jobs().to_string())
       .define("LLVM_TARGET_ARCH", target.split('-').next().unwrap())
       .define("LLVM_DEFAULT_TARGET_TRIPLE", target);

    if target.contains("msvc") {
        cfg.define("LLVM_USE_CRT_DEBUG", "MT");
        cfg.define("LLVM_USE_CRT_RELEASE", "MT");
        cfg.define("LLVM_USE_CRT_RELWITHDEBINFO", "MT");
    }

    if target.starts_with("i686") {
        cfg.define("LLVM_BUILD_32_BITS", "ON");
    }

    if let Some(num_linkers) = build.config.llvm_link_jobs {
        if num_linkers > 0 {
            cfg.define("LLVM_PARALLEL_LINK_JOBS", num_linkers.to_string());
        }
    }

    // http://llvm.org/docs/HowToCrossCompileLLVM.html
    if target != build.config.build {
        // FIXME: if the llvm root for the build triple is overridden then we
        //        should use llvm-tblgen from there, also should verify that it
        //        actually exists most of the time in normal installs of LLVM.
        let host = build.llvm_out(&build.config.build).join("bin/llvm-tblgen");
        cfg.define("CMAKE_CROSSCOMPILING", "True")
           .define("LLVM_TABLEGEN", &host);
    }

    // MSVC handles compiler business itself
    if !target.contains("msvc") {
        if let Some(ref ccache) = build.config.ccache {
           cfg.define("CMAKE_C_COMPILER", ccache)
              .define("CMAKE_C_COMPILER_ARG1", build.cc(target))
              .define("CMAKE_CXX_COMPILER", ccache)
              .define("CMAKE_CXX_COMPILER_ARG1", build.cxx(target));
        } else {
           cfg.define("CMAKE_C_COMPILER", build.cc(target))
              .define("CMAKE_CXX_COMPILER", build.cxx(target));
        }
        cfg.build_arg("-j").build_arg(build.jobs().to_string());

        cfg.define("CMAKE_C_FLAGS", build.cflags(target).join(" "));
        cfg.define("CMAKE_CXX_FLAGS", build.cflags(target).join(" "));
    }

    if env::var_os("SCCACHE_ERROR_LOG").is_some() {
        cfg.env("RUST_LOG", "sccache=debug");
    }

    // FIXME: we don't actually need to build all LLVM tools and all LLVM
    //        libraries here, e.g. we just want a few components and a few
    //        tools. Figure out how to filter them down and only build the right
    //        tools and libs on all platforms.
    cfg.build();

    t!(t!(File::create(&done_stamp)).write_all(rebuild_trigger_contents.as_bytes()));
}

fn check_llvm_version(build: &Build, llvm_config: &Path) {
    if !build.config.llvm_version_check {
        return
    }

    let mut cmd = Command::new(llvm_config);
    let version = output(cmd.arg("--version"));
    if version.starts_with("3.5") || version.starts_with("3.6") ||
       version.starts_with("3.7") {
        return
    }
    panic!("\n\nbad LLVM version: {}, need >=3.5\n\n", version)
}

/// Compiles the `rust_test_helpers.c` library which we used in various
/// `run-pass` test suites for ABI testing.
pub fn test_helpers(build: &Build, target: &str) {
    let dst = build.test_helpers_out(target);
    let src = build.src.join("src/rt/rust_test_helpers.c");
    if up_to_date(&src, &dst.join("librust_test_helpers.a")) {
        return
    }

    println!("Building test helpers");
    t!(fs::create_dir_all(&dst));
    let mut cfg = gcc::Config::new();

    // We may have found various cross-compilers a little differently due to our
    // extra configuration, so inform gcc of these compilers. Note, though, that
    // on MSVC we still need gcc's detection of env vars (ugh).
    if !target.contains("msvc") {
        if let Some(ar) = build.ar(target) {
            cfg.archiver(ar);
        }
        cfg.compiler(build.cc(target));
    }

    cfg.cargo_metadata(false)
       .out_dir(&dst)
       .target(target)
       .host(&build.config.build)
       .opt_level(0)
       .debug(false)
       .file(build.src.join("src/rt/rust_test_helpers.c"))
       .compile("librust_test_helpers.a");
}
const OPENSSL_VERS: &'static str = "1.0.2k";
const OPENSSL_SHA256: &'static str =
    "6b3977c61f2aedf0f96367dcfb5c6e578cf37e7b8d913b4ecb6643c3cb88d8c0";

pub fn openssl(build: &Build, target: &str) {
    let out = match build.openssl_dir(target) {
        Some(dir) => dir,
        None => return,
    };

    let stamp = out.join(".stamp");
    let mut contents = String::new();
    drop(File::open(&stamp).and_then(|mut f| f.read_to_string(&mut contents)));
    if contents == OPENSSL_VERS {
        return
    }
    t!(fs::create_dir_all(&out));

    let name = format!("openssl-{}.tar.gz", OPENSSL_VERS);
    let tarball = out.join(&name);
    if !tarball.exists() {
        let tmp = tarball.with_extension("tmp");
        // originally from https://www.openssl.org/source/...
        let url = format!("https://s3.amazonaws.com/rust-lang-ci/rust-ci-mirror/{}",
                          name);
        let mut ok = false;
        for _ in 0..3 {
            let status = Command::new("curl")
                            .arg("-o").arg(&tmp)
                            .arg(&url)
                            .status()
                            .expect("failed to spawn curl");
            if status.success() {
                ok = true;
                break
            }
        }
        if !ok {
            panic!("failed to download openssl source")
        }
        let mut shasum = if target.contains("apple") {
            let mut cmd = Command::new("shasum");
            cmd.arg("-a").arg("256");
            cmd
        } else {
            Command::new("sha256sum")
        };
        let output = output(&mut shasum.arg(&tmp));
        let found = output.split_whitespace().next().unwrap();
        if found != OPENSSL_SHA256 {
            panic!("downloaded openssl sha256 different\n\
                    expected: {}\n\
                    found:    {}\n", OPENSSL_SHA256, found);
        }
        t!(fs::rename(&tmp, &tarball));
    }
    let obj = out.join(format!("openssl-{}", OPENSSL_VERS));
    let dst = build.openssl_install_dir(target).unwrap();
    drop(fs::remove_dir_all(&obj));
    drop(fs::remove_dir_all(&dst));
    build.run(Command::new("tar").arg("xf").arg(&tarball).current_dir(&out));

    let mut configure = Command::new(obj.join("Configure"));
    configure.arg(format!("--prefix={}", dst.display()));
    configure.arg("no-dso");
    configure.arg("no-ssl2");
    configure.arg("no-ssl3");

    let os = match target {
        "aarch64-unknown-linux-gnu" => "linux-aarch64",
        "arm-unknown-linux-gnueabi" => "linux-armv4",
        "arm-unknown-linux-gnueabihf" => "linux-armv4",
        "armv7-unknown-linux-gnueabihf" => "linux-armv4",
        "i686-apple-darwin" => "darwin-i386-cc",
        "i686-unknown-freebsd" => "BSD-x86-elf",
        "i686-unknown-linux-gnu" => "linux-elf",
        "i686-unknown-linux-musl" => "linux-elf",
        "mips-unknown-linux-gnu" => "linux-mips32",
        "mips64-unknown-linux-gnuabi64" => "linux64-mips64",
        "mips64el-unknown-linux-gnuabi64" => "linux64-mips64",
        "mipsel-unknown-linux-gnu" => "linux-mips32",
        "powerpc-unknown-linux-gnu" => "linux-ppc",
        "powerpc64-unknown-linux-gnu" => "linux-ppc64",
        "powerpc64le-unknown-linux-gnu" => "linux-ppc64le",
        "s390x-unknown-linux-gnu" => "linux64-s390x",
        "x86_64-apple-darwin" => "darwin64-x86_64-cc",
        "x86_64-unknown-freebsd" => "BSD-x86_64",
        "x86_64-unknown-linux-gnu" => "linux-x86_64",
        "x86_64-unknown-linux-musl" => "linux-x86_64",
        "x86_64-unknown-netbsd" => "BSD-x86_64",
        _ => panic!("don't know how to configure OpenSSL for {}", target),
    };
    configure.arg(os);
    configure.env("CC", build.cc(target));
    for flag in build.cflags(target) {
        configure.arg(flag);
    }
    configure.current_dir(&obj);
    println!("Configuring openssl for {}", target);
    build.run_quiet(&mut configure);
    println!("Building openssl for {}", target);
    build.run_quiet(Command::new("make").current_dir(&obj));
    println!("Installing openssl for {}", target);
    build.run_quiet(Command::new("make").arg("install").current_dir(&obj));

    let mut f = t!(File::create(&stamp));
    t!(f.write_all(OPENSSL_VERS.as_bytes()));
}